- This is a lightweight type with a resin body.
- The rivet is sucked and held in the nosepiece by air pressure, and the cut shaft is forcibly collected by using a tank unit or the like (type with suction and discharge device).
Specifications in detail
Required air pressure: 0.5 to 0.6 MPa
Air inlet: G1/4
Shockless Type
With suction and exhaust device
Total length (mm): 240
Joe used: JS (small)
Rivet use range (mm): 2.4, 3.2, 4.0 (NSS/NST not available)
Nosepieces available: 2.4, 3.2, 4.0mm
Rivet diameter range (mm): 2.4 to 4.0
Compatible rivet diameter (mm): 2.4, 3.2, 4.0 (NSS/NST not available)
Type: Shockless type with suction and exhaust device
LOBSTER AR2000SV
