Features
- This is a lightweight type with a resin body.
- The rivet is sucked and held in the nosepiece by air pressure, and the cut shaft is forcibly collected by using a tank unit or the like (type with suction and discharge device).
Specifications in detail
Required air pressure: 0.5 to 0.6 MPa
Air attachment port: G1/4
Shockless type
with suction and exhaust device
Total length (mm): 283
Jaw used: CJM (medium super hard)
Rivet use range (mm): 2.4, 3.2, 4.0
, 4.8 Nosepiece used: 2.4, 3.2, 4.0,
4.8 mm Rivet diameter use range (mm): 2.4 to 4.8
Compatible rivet diameter (mm): 2.4, 3.2, 4.0 , 4.8
Type: Shockless type with suction and exhaust device
LOBSTER AR2000MV
