- This is a lightweight type with a resin body.
- The rivet is sucked and held in the nosepiece by air pressure, and the cut shaft is forcibly collected by using a tank unit or the like (type with suction and discharge device).
Specifications in detail
Required air pressure: 0.5 to 0.6 MPa
Air inlet: G1/4
Shockless Type
With suction and exhaust device
Total length (mm): 323
Jaw used: CJL (super hard large)
Rivet use range (mm): 4.8, 6.4
Nosepieces used: 4.8, 6.4mm
Type: Shockless type with suction and exhaust device
LOBSTER AR2000HV
