Features
- It has the same outer diameter as the conventional NR50, but its overall length is shorter than the NR30.
- Please use the separately sold stand NR50ST for installation.
- Please use the dedicated blade N50FPFL (sold separately).
- It is suitable for cutting spool gates by attaching the holder to the unloader arm or chucking machine.
Note
- Please check the correct purpose, size, and usage before using.
- Please contact us separately for replacement blades.
- Please note that there are straight and reverse blades.
Specifications in detail
Air attachment port: Rc1/4
Cutting capacity: 9.5mm (soft resin), 5.5mm (hard resin)
Cutting capacity (mm) Soft resin: 9.5
Cutting capacity (mm) Hard resin: 5.5
Pressure (N): 1500
Air consumption ((cm3)/time): 1212
Air pressure used (MPa) Total: 0.5-0.6
Width (mm): Φ75
Depth (mm): Φ75
Height (mm): Φ75
Replacement blade for resin: N50FPFL
Total length (mm): 158
Air pressure used (MPa): 0.5-0.6
VESSEL GT-NR50F
