Features
- Since the main body is round, the rotation angle of the main body can be finely adjusted during installation.
- It is suitable for cutting spool gates by attaching the holder to the unloader arm or chucking machine.
- The intake position can be adjusted 180 degrees, allowing it to be freely changed to suit the installation position of the main unit.
Applications
- For cutting and crimping resin and metal
Specifications in detail
Air inlet: Rc1/8
Cutting capacity (mm) Iron wire: 2.0
Cutting capacity (mm) Copper wire: 2.6
Cutting capacity (mm) Soft resin: 7.0
Cutting capacity (mm) Hard resin: 5.0
Pressure (N): 1372
Air consumption ((cm3)/time): 230
Total air pressure (MPa): 0.5-0.6
Width (mm): 45
Depth (mm): 45
Height (mm): 129
Spare blade for iron and copper: N20AS, N20H S, N20AG, N20BFB
Replacement blade for resin: N20AP, N20AJ, N20AJL, N20AJB, N20PF, N20AE, N20AH, N20AML1498, NM20AJ, NM20AP, NM20AE
Total length (mm): 129
Inner diameter of air hose used (mm): 5
Air pressure used (MPa): 0.5 to 0.6
Cutting capacity (mm) Piano wire: 1.0
Frame angle (mm): 45
VESSEL GT-NR20
