Features
- Great flexibility.
- Ideal for general pneumatic piping that requires a small bending radius.
- Cut marks are provided at 500mm intervals to help you when cutting the tube.
Note
- Do not apply loads such as tension, twisting, or extreme bending to the tube, as this may cause the tube to collapse, burst, or come loose.
- Do not scratch or tangle the tube as this may cause the tube to burst.
- The tube's bursting pressure decreases as the temperature rises, so be sure to understand the operating pressure and ensure that you have a sufficient safety margin.
- Use the tube with a minimum bending radius or greater.
- When installing the tubes, leave sufficient slack to allow for changes in length, etc.
Specifications in detail
Color: Clear
Outer diameter (mm): 2
Inner diameter (mm): 1.2
Minimum bending radius (mm): 4
Total length (m): 20
Operating temperature range (℃): -15 to 60 (no freezing)
Fluid used: Air, water (conditions apply)
Minimum mounting radius (mm): 6
Maximum operating pressure: 1.0 MPa (at 20℃ 65% RH)
Vacuum pressure used (kPa): -100
PISCO UB0212-20-C
