Features
- It has excellent pressure resistance, abrasion resistance, and cold resistance.
- It is resistant to bending fatigue and can be used stably for long periods of time.
- Cut marks, which are convenient when cutting the tube, are displayed approximately every 500 mm.
Note
- Do not apply loads such as tension, twisting, or extreme bending to the tube, as this may cause the tube to collapse, burst, or come loose.
- Do not scratch or tangle the tube as this may cause the tube to burst.
- The tube's bursting pressure decreases as the temperature rises, so be sure to understand the operating pressure and ensure that you have a sufficient safety margin.
- Use the tube with a minimum bending radius or greater.
- When installing the tubes, leave sufficient slack to allow for changes in length, etc.
Specifications in detail
Operating pressure: 1.5MPa (at 20℃ 65%RH)
Operating vacuum pressure: -100kPa
Operating temperature range: -15 to 90℃ (no freezing)
Color: Red
Outer diameter (mm): 8
Inner diameter (mm): 6
Minimum bending radius (mm): 24
Total length (m): 100
Maximum operating pressure (MPa): 2.0
Operating temperature range (℃): For air: -20 to 100 (no freezing) / For water and heat transfer oil: -15 to 90 (no freezing)
Operating vacuum pressure (MPa): -0.1
Operating fluid: Air, water (conditions apply), heat catalyst oil (conditions apply)
PISCO NA0860-100-R
