Features
- By simply clamping the insulated wire, you can quickly check and inspect three-phase power supplies.
- Voltage can be measured without contacting metal.
- Phase detection and line voltage confirmation and inspection can be completed with a single measurement.
- Measurements can be performed safely as it only requires clamping the insulated wire.
- The backlight color and buzzer sound allow you to tell at a glance whether the signal is positive or negative.
- It is convenient for taking construction identification photos as it can display phase sequence, ground phase, and three-phase voltage values on the same screen.
- It is also possible to check the voltage of single-phase three-wire.
- Compatible with the Wireless Adapter Z3210 (optional), it transfers data and displays three-phase vector diagrams and unbalance rates using the free GENNECT Cross app.
Applications
- For checking electrical work on three-phase circuits.
- To check electrical renovation work.
- For checking replacement work of three-phase motors and pumps.
Specifications in detail
Compliance standards: EN61010 (safety), EN61326 Class A (EMC)
Maximum rated power: 3VA
Continuous use time: 5 hours (with display backlight off and in standby mode)
Protection class: Main unit IP54 (EN60529) (excluding voltage sensor)
Width x depth x height: 84 x 46 x 146 mm
Operating voltage range: AC90 to 520V
Measurement voltage range: AC90.0V to 520.0V
Power supply (V): 4 AA alkaline batteries (LR6) (included)
Power supply: 4 AA alkaline batteries (LR6) (included)
Measured conductor diameter (mm): 6 to 30
Continuous use time (hours): 5 (Z3210 not installed)
HIOKI PD3259-50
