Daikin Industries, Ltd. Việt Nam | Daikin oil cooling system Oilcon (circulation type) MW7609370

Thông tin sản phẩm

Circulation type
Cooling capacity (kW) (50/60Hz): 5.0/5.6
External dimensions (mm): 1110 x 470 x 560
Noise level (dB): 65
Outside dimensions ( mm): 1110 x 470 x 560
Oil pump discharge rate (50/60Hz) (L/min): 30/36.0

Daikin Industries, Ltd. AKZ569

Daikin Industries, Ltd. Việt Nam | Daikin oil cooling system Oilcon (circulation type) MW7609370

Thương hiệu: DAIKIN

Liên hệ

This is an oil cooling device with a built-in circulation pump (air-cooled type) that can control the oil temperature with high precision (±0.1℃).
You can now easily warm up for up to 99 hours.
It has a wide cooling capacity control range and can control temperature in low load areas.
Auto tuning function.
Outputs an alarm signal when there is a refrigerant gas leak (cooling is not possible).
Achieved high energy saving rate by using a unique IPM motor and new refrigerant R410A. (About 20% reduction in electricity bill compared to Daikin non-inverter machines)

Hydraulic oil cooling: Temperature (viscosity) management.
Cooling oil cooling: Cooling the outer periphery of the built-in motor.
Lubricating oil cooling: Cooling inside the gearbox.