Features
- No power supply is required, and it operates only with air supply to generate pulse blow (intermittent blow).
- There are two adjustment valves for fine adjustment.
- Can be used at low pressure.
- The surface of the main body is shot blasted.
- By repeatedly turning the air on and off, air consumption can be reduced by approximately 50%.
- Reduces air consumption at the air blow point by approximately half.
Applications
- Blowing away chips.
- Various air blowers.
- Cooling by air blowing during cutting, sawing and grinding operations.
Specifications in detail
Fluid used: Compressed air
Nozzle diameter (mm): 4 or less
Nozzle mounting port: Rc1/4
Air pressure used (MPa): 0.3 to 0.7
Hose mounting port: Rc3/8
Width (mm): 80
Height (mm): 50
Depth (mm): 30
CHIYODA PB-1000S
