Chiyoda Pulse Blow Controller (for fixed nozzle) MW1259078

Chiyoda Pulse Blow Controller (for fixed nozzle) MW1259078

Thông tin sản phẩm

Fluid used: Compressed air
Nozzle diameter (mm): 4 or less
Nozzle installation port: Rc1/4
Used air pressure (MPa): 0.3 to 0.7
Hose installation port: Rc3/8
br>Width (mm): 80
Fluid used: Compressed air
Height (mm): 50
Depth (mm): 30

Chiyoda Tsusho PB- 1000S

Chiyoda Pulse Blow Controller (for fixed nozzle) MW1259078

Thương hiệu: Chiyoda Tsusho

Liên hệ

No power supply required, only air supply is required to generate pulse blow (intermittent blow).
Equipped with two adjustment valves for fine adjustments.
Can be used at low pressure.
The surface of the main body is shot blasted.
Air consumption can be reduced by approximately 50% by repeatedly turning the air on and off.
Reduces air consumption at the air blow point by approximately 1/2.

Blowing away chips.
Various air blows.
Cooling by air blow during cutting, cutting, and grinding operations.

Chiyoda Tsusho PB-1000S

Xem thêm

Các thương hiệu bán chạy

Thông tin sản phẩm

Fluid used: Compressed air
Nozzle diameter (mm): 4 or less
Nozzle installation port: Rc1/4
Used air pressure (MPa): 0.3 to 0.7
Hose installation port: Rc3/8
br>Width (mm): 80
Fluid used: Compressed air
Height (mm): 50
Depth (mm): 30

Chiyoda Tsusho PB- 1000S

Cùng thương hiệu

Giỏ hàng

Tìm kiếm sản phẩm