113A (2 pcs.) - Adjustable wrenches 6" and 10"
115A.100 (1 pcs.) - Pin wrench
134A.18 (1 pcs.) - Pipe wrench
138A.18 (1 pcs.) - Strap wrench 4"
167A (3 pcs.) - Outside-circlip® pliers 13 - 18 - 23
169A (3 pcs.) - Inside-circlip® pliers 13 - 18 - 23
181A.25CPE (1 pcs.) - Lockable multigrip pliers
181A.30G (1 pcs.) - Lockable multigrip pliers
185.20CPE (1 pcs.) - Sheathed straight half-round nose pliers
187.18CPE (1 pcs.) - Sheathed combination pliers
188.16CPE (1 pcs.) - Sheathed flat-nose pliers
189.17CPE (1 pcs.) - Sheathed round-nose pliers
191A.18EL (1 pcs.) - Low-effort cutters
192.16CPE (1 pcs.) - Piano wire diagonal cutters
195.20CPE (1 pcs.) - Sheathed angled half-round nose pliers
200H (2 pcs.) - Riveting hammers 24 and 32 mm
208A.32CBA (1 pcs.) - Interchangeable-tip mallets
212A.40 (1 pcs.) - Dead-blow hammer
221.227J2 (41 pcs.) - Tap and die set (in a case)
222A.TJ19 (19 pcs.) - Box set of drill-bits 1 to 10 mm
231 (1 pcs.) - Three-square scraper
234 (1 pcs.) - Scriber
237.A (1 pcs.) - Thread restoring tool
239.EA (1 pcs.) - Inch dies
239 (1 pcs.) - Refrigeration" flaring tool (in a case)
245.J2 (26 pcs.) - Set of gasket punches in a case
247.G (5 pcs.) - Sheathed nail-sets: 2 - 3 - 4 - 6 - 8 mm
249.G (5 pcs.) - Sheathed drift punches set: 2 - 3 - 4 - 6 - 8 mm
256.4 (1 pcs.) - Precision centre punch 4 mm
257.G (1 pcs.) - Sheathed automatic centre punch
263.18 (1 pcs.) - Chisel
265.20 (1 pcs.) - Constant-profile cape chisel
269 (1 pcs.) - Crowbar
285.JS10 (10 pcs.) - Set of stud extractors
31.JE6T (6 pcs.) - Roll set of low profile open-end wrenches 8 to 19 mm
311B.60 (1 pcs.) - Level with protractor dial
334B.35 (1 pcs.) - Tube cutter 3 to 35mm
374A.20 (1 pcs.) - Double-action oil can
39.JE10T (10 pcs.) - Roll set of short combination wrenches 3.2 to 11 mm
401.MT (1 pcs.) - Extra-long flat-nose precision pliers
403.MT (1 pcs.) - Precision angled half-roundnose pliers
405.12MT (1 pcs.) - Precision diagonal cutters
40LA (4 pcs.) - Long combination wrenches 33, 35, 36, 38 mm
43.JE5T (5 pcs.) - Roll set of flare-nut wrenches 7 to 19 mm
44.JE12 (12 pcs.) - Open-end wrenches 6 to 32 mm
440.JE18 (18 pcs.) - Combination wrenches 6 to 24 mm
440 (6 pcs.) - Combination wrenches 26 to 30 and 32 mm
440.JU12 (12 pcs.) - Combination wrenches 1/4" to 15/16"
449.Z3A (1 pcs.) - Crimping plier and terminal set
495A.22EL (1 pcs.) - Heavy-duty end nippers
501 (1 pcs.) - Long-nose lock-grip pliers
507A (1 pcs.) - Compact lock-grip pliers
509 (1 pcs.) - Compact lock-grip pliers
521.200 (1 pcs.) - Sliding jaw lock-grip clamp
603F (1 pcs.) - Hacksaw frame
668B.8 (10 pcs.) - Bimetal hacksaw blades
701B (1 pcs.) - Multifunction tester
777B.230 (1 pcs.) - Inspection lamp
804 (1 pcs.) - Feeler gauge, 19 blades
809.J2 (8 pcs.) - Measuring and scribing instrument kit
827B (1 pcs.) - Magnetic retriever
82H.JP9A (9 pcs.) - Sleeve set of hexagonal keys: 1.5 to 10 mm
82H.JU10 (10 pcs.) - Roll of offset hexagonal keys 1/16" to 3/8"
830A.10 (1 pcs.) - Ratchet tool-holder
830A.10L (1 pcs.) - Long ratchet tool-holder
834.R2 (1 pcs.) - Articulated mirror
83SH.JP9A (9 pcs.) - Sleeve set of spherical head hex keys 1.5 to 10 mm
840.1 (1 pcs.) - Electricians knife with wire stripper
841 (1 pcs.) - Electricians scissors
84E.J1 (5 pcs.) - Case-set of nut spinners
883B (1 pcs.) - Right-cut scroll shears
887A (1 pcs.) - Nibblers
89.JP8A (8 pcs.) - Torx® keys no. 10 to 45
893.316 (1 pcs.) - Locking tape measure 3 m
94A.JE13T (13 pcs.) - Roll set of nut spinners 3.2 to 14 mm
980C (1 pcs.) - Serrated shears
985761 (1 pcs.) - Automatic wire cutter-stripper
990.B1 (1 pcs.) - Bolt cropper
996.5 (1 pcs.) - Steel cable cutters
A.VE (3 pcs.) - 1,000 V insulated screwdrivers slotted head 3.5x100 - 4x100 - 6.5x150 mm
AEF.J1 (5 pcs.) - Case set of Micro-Tech® screwdrivers
AF (1 pcs.) - Screw starter for slotted heads
AN (5 pcs.) - Screwdrivers for slotted heads: 3.5x75 - 4x100 - 5.5x100 mm and short: 4x35 - 6.5x35 mm
AND (3 pcs.) - Screwdrivers for Pozidriv® PZ heads no. 0-1-2
ANF (2 pcs.) - Screwdrivers for slotted heads 6.5x150 - 8x200 mm
ANP (5 pcs.) - Screwdrivers with Phillips® PH 0-1-2 head and short: 1x35 - 2x35 mm
AP.VE (2 pcs.) - 1,000 V insulated screwdrivers Phillips® PH 1x100 - 2x125
AP6X80 (1 pcs.) - Square punch
AS.12LTP180T2 (12 pcs.) - Wallet set of needle files, 180 mm
AV.HT1B (1 pcs.) - Voltsage tester screwdriver 90 to 480 Volts
AWDH3X150 (1 pcs.) - Hexagonal blade screwdriver for Pozidriv® PZ 3 with hexagon shoulder
AWH10X175 (1 pcs.) - Hexagonal blade screwdriver for slotted heads with hexagon shoulder
AWPH3X150 (1 pcs.) - Hexagonal blade screwdriver for Pozidriv® PZ 3 with hexagon shoulder
DELA.1051.05 (1 pcs.) - Rule 300 mm
JET.8GM3 (1 pcs.) - JET+ 8-drawer roller cabinets - 3 modules per drawer
JET.C4GM3 (1 pcs.) - JET+ 4-drawer chest - 3 modules per drawer
K.432E (16 pcs.) - 3/4" "truck" sockets and accessories: 30 to 55 mm (in a case)
NS.265M (21 pcs.) - Impact screwdriver set with bits
NS.500A (26 pcs.) - 1/2" impact sockets and accessories: 8 to 27 mm
R.40U (11 pcs.) - Rack socket-set 3/16" to 9/16"
RL.NANO1 (38 pcs.) - 1/4" sockets: 5.5 to 14 mm and accessories (in a case)
S.141A (1 pcs.) - 1/2" long drive hinged handle
S.306A200 (1 pcs.) - Torque wrench 40 to 200 Nm
S.40U (7 pcs.) - Rack socket-set 3/8" to 21/32"
S.41U (6 pcs.) - Rack socket-set 11/16" to 1"
S.440AP (29 pcs.) - 1/2" Sockets and accessories: 8 to 32 mm (in a case)
STG (5 pcs.) - Files
T5.L65 (1 pcs.) - Trigger-release lock-grip pliers (with aluminium griping)
U.302 (1 pcs.) - 3-leg puller 6 to 80 mm
U.306A140 (1 pcs.) - 3-leg puller ø 7 to 140 mm
U.306G2 (3 pcs.) - Legs for inside application
U.306M (1 pcs.) - Slide hammer
Y.RIV1 (1 pcs.) - Riveting kit
113A (2 pcs.) - Adjustable wrenches 6" and 10"
115A.100 (1 pcs.) - Pin wrench
134A.18 (1 pcs.) - Pipe wrench
138A.18 (1 pcs.) - Strap wrench 4"
167A (3 pcs.) - Outside-circlip® pliers 13 - 18 - 23
169A (3 pcs.) - Inside-circlip® pliers 13 - 18 - 23
181A.25CPE (1 pcs.) - Lockable multigrip pliers
181A.30G (1 pcs.) - Lockable multigrip pliers
185.20CPE (1 pcs.) - Sheathed straight half-round nose pliers
187.18CPE (1 pcs.) - Sheathed combination pliers
188.16CPE (1 pcs.) - Sheathed flat-nose pliers
189.17CPE (1 pcs.) - Sheathed round-nose pliers
191A.18EL (1 pcs.) - Low-effort cutters
192.16CPE (1 pcs.) - Piano wire diagonal cutters
195.20CPE (1 pcs.) - Sheathed angled half-round nose pliers
200H (2 pcs.) - Riveting hammers 24 and 32 mm
208A.32CBA (1 pcs.) - Interchangeable-tip mallets
212A.40 (1 pcs.) - Dead-blow hammer
221.227J2 (41 pcs.) - Tap and die set (in a case)
222A.TJ19 (19 pcs.) - Box set of drill-bits 1 to 10 mm
231 (1 pcs.) - Three-square scraper
234 (1 pcs.) - Scriber
237.A (1 pcs.) - Thread restoring tool
239.EA (1 pcs.) - Inch dies
239 (1 pcs.) - Refrigeration" flaring tool (in a case)
245.J2 (26 pcs.) - Set of gasket punches in a case
247.G (5 pcs.) - Sheathed nail-sets: 2 - 3 - 4 - 6 - 8 mm
249.G (5 pcs.) - Sheathed drift punches set: 2 - 3 - 4 - 6 - 8 mm
256.4 (1 pcs.) - Precision centre punch 4 mm
257.G (1 pcs.) - Sheathed automatic centre punch
263.18 (1 pcs.) - Chisel
265.20 (1 pcs.) - Constant-profile cape chisel
269 (1 pcs.) - Crowbar
285.JS10 (10 pcs.) - Set of stud extractors
31.JE6T (6 pcs.) - Roll set of low profile open-end wrenches 8 to 19 mm
311B.60 (1 pcs.) - Level with protractor dial
334B.35 (1 pcs.) - Tube cutter 3 to 35mm
374A.20 (1 pcs.) - Double-action oil can
39.JE10T (10 pcs.) - Roll set of short combination wrenches 3.2 to 11 mm
401.MT (1 pcs.) - Extra-long flat-nose precision pliers
403.MT (1 pcs.) - Precision angled half-roundnose pliers
405.12MT (1 pcs.) - Precision diagonal cutters
40LA (4 pcs.) - Long combination wrenches 33, 35, 36, 38 mm
43.JE5T (5 pcs.) - Roll set of flare-nut wrenches 7 to 19 mm
44.JE12 (12 pcs.) - Open-end wrenches 6 to 32 mm
440.JE18 (18 pcs.) - Combination wrenches 6 to 24 mm
440 (6 pcs.) - Combination wrenches 26 to 30 and 32 mm
440.JU12 (12 pcs.) - Combination wrenches 1/4" to 15/16"
449.Z3A (1 pcs.) - Crimping plier and terminal set
495A.22EL (1 pcs.) - Heavy-duty end nippers
501 (1 pcs.) - Long-nose lock-grip pliers
507A (1 pcs.) - Compact lock-grip pliers
509 (1 pcs.) - Compact lock-grip pliers
521.200 (1 pcs.) - Sliding jaw lock-grip clamp
603F (1 pcs.) - Hacksaw frame
668B.8 (10 pcs.) - Bimetal hacksaw blades
701B (1 pcs.) - Multifunction tester
777B.230 (1 pcs.) - Inspection lamp
804 (1 pcs.) - Feeler gauge, 19 blades
809.J2 (8 pcs.) - Measuring and scribing instrument kit
827B (1 pcs.) - Magnetic retriever
82H.JP9A (9 pcs.) - Sleeve set of hexagonal keys: 1.5 to 10 mm
82H.JU10 (10 pcs.) - Roll of offset hexagonal keys 1/16" to 3/8"
830A.10 (1 pcs.) - Ratchet tool-holder
830A.10L (1 pcs.) - Long ratchet tool-holder
834.R2 (1 pcs.) - Articulated mirror
83SH.JP9A (9 pcs.) - Sleeve set of spherical head hex keys 1.5 to 10 mm
840.1 (1 pcs.) - Electricians knife with wire stripper
841 (1 pcs.) - Electricians scissors
84E.J1 (5 pcs.) - Case-set of nut spinners
883B (1 pcs.) - Right-cut scroll shears
887A (1 pcs.) - Nibblers
89.JP8A (8 pcs.) - Torx® keys no. 10 to 45
893.316 (1 pcs.) - Locking tape measure 3 m
94A.JE13T (13 pcs.) - Roll set of nut spinners 3.2 to 14 mm
980C (1 pcs.) - Serrated shears
985761 (1 pcs.) - Automatic wire cutter-stripper
990.B1 (1 pcs.) - Bolt cropper
996.5 (1 pcs.) - Steel cable cutters
A.VE (3 pcs.) - 1,000 V insulated screwdrivers slotted head 3.5x100 - 4x100 - 6.5x150 mm
AEF.J1 (5 pcs.) - Case set of Micro-Tech® screwdrivers
AF (1 pcs.) - Screw starter for slotted heads
AN (5 pcs.) - Screwdrivers for slotted heads: 3.5x75 - 4x100 - 5.5x100 mm and short: 4x35 - 6.5x35 mm
AND (3 pcs.) - Screwdrivers for Pozidriv® PZ heads no. 0-1-2
ANF (2 pcs.) - Screwdrivers for slotted heads 6.5x150 - 8x200 mm
ANP (5 pcs.) - Screwdrivers with Phillips® PH 0-1-2 head and short: 1x35 - 2x35 mm
AP.VE (2 pcs.) - 1,000 V insulated screwdrivers Phillips® PH 1x100 - 2x125
AP6X80 (1 pcs.) - Square punch
AS.12LTP180T2 (12 pcs.) - Wallet set of needle files, 180 mm
AV.HT1B (1 pcs.) - Voltsage tester screwdriver 90 to 480 Volts
AWDH3X150 (1 pcs.) - Hexagonal blade screwdriver for Pozidriv® PZ 3 with hexagon shoulder
AWH10X175 (1 pcs.) - Hexagonal blade screwdriver for slotted heads with hexagon shoulder
AWPH3X150 (1 pcs.) - Hexagonal blade screwdriver for Pozidriv® PZ 3 with hexagon shoulder
DELA.1051.05 (1 pcs.) - Rule 300 mm
JET.8GM3 (1 pcs.) - JET+ 8-drawer roller cabinets - 3 modules per drawer
JET.C4GM3 (1 pcs.) - JET+ 4-drawer chest - 3 modules per drawer
K.432E (16 pcs.) - 3/4" "truck" sockets and accessories: 30 to 55 mm (in a case)
NS.265M (21 pcs.) - Impact screwdriver set with bits
NS.500A (26 pcs.) - 1/2" impact sockets and accessories: 8 to 27 mm
R.40U (11 pcs.) - Rack socket-set 3/16" to 9/16"
RL.NANO1 (38 pcs.) - 1/4" sockets: 5.5 to 14 mm and accessories (in a case)
S.141A (1 pcs.) - 1/2" long drive hinged handle
S.306A200 (1 pcs.) - Torque wrench 40 to 200 Nm
S.40U (7 pcs.) - Rack socket-set 3/8" to 21/32"
S.41U (6 pcs.) - Rack socket-set 11/16" to 1"
S.440AP (29 pcs.) - 1/2" Sockets and accessories: 8 to 32 mm (in a case)
STG (5 pcs.) - Files
T5.L65 (1 pcs.) - Trigger-release lock-grip pliers (with aluminium griping)
U.302 (1 pcs.) - 3-leg puller 6 to 80 mm
U.306A140 (1 pcs.) - 3-leg puller ø 7 to 140 mm
U.306G2 (3 pcs.) - Legs for inside application
U.306M (1 pcs.) - Slide hammer
Y.RIV1 (1 pcs.) - Riveting kit
